Racing Shells Colours and Boat names

Boat colors

Standard

The standard color for Swift boats is white hull and canvas decks, with black tips for the bow and stern. Hull and canvas decks are finished with 3 coats of UV resistant polyurethane paint, with 2 additional coats for the trim, to help protect the most vulnerable areas of your boat.

Elite carbon with clear finish

The standard color for Elite Carbon boats is the same as above.
However, as an option, the hull and canvas decks can be finished in clear UV resistant polyurethane paint, with white trim and white joint lines - ask distributor about extra cost.

Custom colours

  • Standard:main colour is white, trim colour is black
  • Custom A: main is white, trim is a colour other than black - ask distributor about extra cost
  • Custom B: main is NOT white, trim is EITHER black or other colour - ask distributor about extra cost
  • Custom C: all other combinations, such as white hull, red bow and stern canvas, yellow trim - ask distributor about extra cost

Please note; we use the word "trim" to explain the black parts on the boat (bow and stern). All other parts (hull, bow canvas & stern canvas) we call "main".

The choice of trim and main colors is shown in this chart.

RAL#NameMainTrimStickerRAL#NameMainTrimSticker
RAL 9005BlackNoYesWhiteRAL 4008PurpleYesYesWhite
RAL 7036Medium greyYesYesWhiteRAL 4006MagentaYesYesWhite
RAL 8011Dark brownNoYesWhiteRAL 3015Light pinkYesYesWhite
RAL 8002Medium brownNoYesWhiteRAL 3001RedYesYesWhite
RAL 6012Hunter greenNoYesWhiteRAL 2008OrangeYesYesWhite
RAL 6001Kelly greenYesYesWhiteRAL 1018YellowYesYesBlack
RAL 6017Light greenYesYesWhiteRAL 1016Light yellowYesYesBlack
RAL 5010Dark blueNoYesWhiteRAL 9003WhiteYesYesBlack
RAL 5015Light blueYesYesWhite
RAL 5012Aqua blueYesYesWhite

PLEASE NOTE that the colours shown here are only very approximate representations. If the choice of colour is very important, then you should check the colour using the RAL numbers listed above.

Clear carbon option

The standard colour for Elite Carbon boats is the same as above. However, as an additional option, the hull and canvas decks can be finished in clear UV resistant polyurethane paint, with white trim and white joint lines - ask distributor about extra cost.

Chevrons - ask distributor about extra cost

Chevrons need to be ordered on "add notes" page of the order form. All "trim" colours can be used.

All chevrons are 80mm wide, and the angle is 45 degrees. Bow chevrons point to bow, stern chevrons point to stern. "Chevron1" is closest to the center of the boat.

The photo shows 3 chevrons, not 2. Chevron 1 is green, chevron 2 is yellow, chevron 3 is green.

Example of how to request chevrons:

I want 3 chevrons on bow and stern.
Bow: 1st: RAL4006, 2nd: RAL5015, 3rd: RAL1016.
Stern: 1st: RAL4006, 2nd: RAL5015, 3rd: RAL1016.

Boat names

50mm tall, arial font, in UPPER CASE & lower case. MUST be ordered at the same time as boat. Ask Distributor about cost.